How to choose the actuator, pump head and hose of micro peristaltic pump

Micro peristaltic pump because it can control the flow rate of fluid stability;No pollution conveying fluid;Simple and cheap maintenance,has been favored by scientific research,environmental protection,food,agriculture,chemical and other industries.It is mainly composed of three parts:driver,pump head and hose.Then how to choose the accessories of these three micro peristaltic pumps?

I.Drive

When selecting a driver,generally consider three aspects:speed,control form,protection level.Speed:The higher the speed,the greater the flow.Chuanggrui recommends a speed slightly higher than their own needs.Control form:generally adjustable speed,flow distribution,external control and other forms.Protection level:The higher the protection level is,the higher the ability of water immersion is.Select the corresponding protection level according to the working environment of your own industry.

Second,the pump head

The selection of pump head generally considers five aspects:reference flow,channel requirements,roller requirements,chemical resistance,hose replacement.Different pump head with different hose,the flow is not the same,so please pay attention to the reference flow when choosing the pump head.Channel is divided into single channel or multi-channel,if there is a need for multi-channel,choose multi-channel pump head or pump head series can also be connected.

The less the rollers of the peristaltic pump,the higher the flow fluid pulsation,the more unstable the flow rate,if the stability of the fluid requirements are high,it is recommended to choose the pump head with more rollers.Peristaltic pump for long periods of time,overflow fluid may damage the pump head,so this aspect should also be considered.If the hose replacement frequency is high,you are advised to use a peristaltic pump that can quickly replace the hose.

Three,hose

Consider five aspects when selecting a hose:reference flow,chemical resistance,fluid temperature,hose life,suction head.Different types of hoses carry different amounts of water.Select the appropriate hose based on your requirements.Hose material is different,different temperature resistance,ordinary rubber hose can reach 100°,and silicone rubber hose can withstand 200°high temperature.

Among the three accessories of the micro peristaltic pump,the main contact with the fluid is the hose,so the chemical resistance of the hose is the key consideration when choosing,such as silicone rubber can resist high and low temperature,and fluorine rubber has oxidation resistance and corrosion resistance.Although for different use,hose life also fluctuates.

Suction lift:The peristaltic pump relies on the vacuum generated between the rotors,using the air pressure difference for fluid transport,which also produces suction and lift.Suction range refers to the vertical distance between the pumping port and the liquid to be pumped,and the head refers to the height of the pump water.The material,inner diameter,wall thickness and other factors of the hose will affect the suction head.