Classification according to peristaltic pump operation and use

1.Speed-regulating peristaltic pump:with basic control functions of peristaltic pump,display speed,start and stop,direction,speed adjustment,filling and empting,power off memory,external control input and other functions.

2,flow type peristaltic pump:in addition to the basic function,increase the flow display,flow correction,communication and other functions.

3,distribution peristaltic pump:in addition to the basic control function,increase the flow display,flow correction,communication,liquid distribution,suction,output control and other functions.

4,customized(OEM)peristaltic pump:with a series of different flow range of peristaltic pump head,customers can according to their own equipment needs,design different peristaltic pump drive circuit supporting use.

Application:Chemical industry;Mining and metallurgy industries;Paper industry;Paint coating industry;Food industry;Ceramic industry;Oil industry;Water treatment industry;Pharmaceutical industry;Medical device industry,etc.

Pharmaceutical industry application:the application of peristaltic pump in pharmaceutical industry is mainly used for drug coating granulation and liquid dispensing.Spray drying granulator is also called dry granulator and fluidized bed granulator,which is used to spray special icing on the surface of various particles and form particles after drying.These pelletizer itself specific dry heat source,can play the purpose of evaporating water,but water evaporation and particle formation is a dynamic relationship.

The amount of liquid and water that is sprayed must be very precise to ensure that the particles are moist enough to form perfectly.In the process of daily use,after using for a long time to change the hose as far as possible,so that it is not easy to cause the silicone tube rupture,fluid from tube within the limited capacity of flow into the pump head roller with corrosive liquid into the roller gap,wash immediately remove will pump in order to avoid weathering after solidification in the roller gap,will cause the pump head stuck phenomenon.

The hose should be replaced in time according to the use frequency of the specific pump,or the position should be moved frequently.If the liquid is highly corrosive,please choose the hose of the corresponding material to avoid damage to the pump.